
Motors
and controls
PMSM, BLDC,
SRM
PMSM,ACIM,BLDC,DC,
Stepper and SRM |
Image
processing
Ethernet
camera ,Scanning camera
3D Imaging
system. |
Embedded
products:
Class-D
Public address amplifier, audio visual, sinewave inverter. |
Electro
mechanical
Flying
car/UAV/VTOL Toy, Electric bike,
Submersible
pump
|
Vibration
system
DSP based
vibration controller with class D amplifier. |
Research
on gravity
magnetism
Paper published in
"Gravitation & Cosmology" proceedings,ICGA-5, 2001 .
|
|
|
|
|
|
 |
|
PRODUCT RANGE
|
 |
|
|
Compact Electronic Submersible Pumps
(62mm OD, 0.75 HP for domestic water supply)
Available in 2 models

A submersible pump is a centrifugal pump attached to a motor and operates while submersed in water. SKD submersible pumps are compact in size and are available in outer diameter of 62mm suitable for 3" (75mm) bore wells. It uses a high efficiency Permanent Magnet Synchronous Motor with DSP based Electronic Control which can be operated on single phase 220V AC supply. The improved technology of the motor makes it run with low starting current and thus giving a smooth startup to the pump making it suitable for operation on any type of inverters. The series of impellers are stacked upto 3 stages to give the high pressure and large volume of water.
Key Feature of the Technology
PMS Motor of Electronic Submersible Pump runs on High Electrical Frequency which enables the motor to deliver High Speed above 6000 RPM and High Efficiency in a compact size while the Conventional Pumps working directly on AC mains supply can run upto maximum speed of 2900 RPM.
Salient Features
 |
Compact Design
|
 |
Advanced technology for motors and Electronic Motor Control
|
 |
High speed motor and pump gives good pressure and head in compact design
|
 |
Low
starting current (Smooth start)
|
 |
Operating on single phase AC
|
 |
Dry
run protection
|
 |
Can
work on home inverters
|
 |
No
single phase protection required
|
 |
No
phase sequence protection required
|
 |
Easy
installation and easy rewinding
|
 |
Low
installation cost (saves cost on boring & well pipe)
|
 |
Heavy machinery is not require for boring and thus it can easily be
installed manually.
|
 |
Noiseless operation |
Specifications
1 |
Max. Discharge rate |
80 LPM |
2 |
Max. Head |
45 meters |
3 |
Impeller |
Upto 3 Stages |
4 |
Speed |
6000 - 8000 rpm |
5 |
Motor |
6 Pole, Permanent Magnet Synchronous Motor (oil filled) |
6 |
Motor Capacity |
0.75 HP |
7 |
Control Drive |
ADMCF326 based Electronic Control |
8 |
Electrical Frequency |
350 - 400 Hz |
9 |
Input Voltage |
170-270 V, 1 f AC |
10 |
Dimensions |
62mm x 390mm |
11 |
Weight |
Below 5 Kilograms |
Model |
HP |
Stages |
Outlet |
Discharge Rate versus Head |
SKDSUB75-H |
0.75 |
3 |
1.25" |
Discharge (LPM) |
20 |
25 |
35 |
40 |
42 |
52 |
60 |
Head (Meters) |
43 |
41 |
38 |
35 |
34 |
29 |
21 |
Model |
HP |
Stages |
Outlet |
Discharge Rate versus Head |
SKDSUB75-L |
0.75 |
2 |
1.25" |
Discharge (LPM) |
36 |
45 |
52 |
60 |
70 |
78 |
84 |
Head (Meters) |
33 |
31 |
29 |
27 |
24 |
21 |
18 |

Electronic Drive

|
|